Model Kits

The Apollo 11 moon landing required two spacecraft - The lunar module (LM) and command service module (CSM). Once in lunar orbit, the two would separate so the LM could land while the CSM waited in orbit. After launching from the lunar surface, the LM’s ascent stage would rendezvous and dock with the waiting CSM, then the astronauts would transfer back into the main spacecraft and head home. It sounds nearly impossible but that’s the way it was July 20, 1969.Set for assembly of miniature steel models. No glue or soldering is required, but a pointed toning or tweezers facilitates assembly.Contents: laser-cut metal sheets, building instructionsModel size: 12.9 x 5.8 x 8.8 cmMaterial: steelProduct safety notices:Ages 14 and upThis is a collectible, not a toy.

We don't need roads in the future - but this great kit!This kit for an extremely detailed metal model of the DeLorean from 'Back to the Future' is made of laser-cut and engraved steel sheets. No tools are required for assembly, but narrow pliers and tweezers make work much easier. Attention: This is a complex kit for advanced users.Officially licensed product.Material: steelContents: 2.5 metal charts, construction instructionsModel size: approx. 8.9 x 3.18 x 2.92 cmProduct safety notices:Ages 14 and upThis is a collectible, not a toy.

This kit for an extremely detailed premium metal model of the Ecto-1 from 'Ghostbusters' is made of laser-cut and engraved steel sheets. No tools are required for assembly, but narrow pliers and tweezers make work much easier. Attention: This is a complex kit for advanced users.Officially licensed productContents: 3 laser-cut metal sheets, building instructionsModel size: approx. 16.8 x 6.4 x 6.9 cmMaterial: steelDifficulty: ChallengingProduct safety notices:Ages 14 and upThis is a collectible, not a toy.

The Hubble Space Telescope was launched into low Earth orbit April 24th, 1990. Operating outside the distortion of the Earth’s atmosphere it is able to take extremely high-resolution visible-light images. Hubble has recorded some of the most detailed visible-light images ever, allowing a deep view into space and time.Contents: 1 laser-cut metal sheet, building instructionsModel size: 7.6 x 5.1 x 6.4 cmMaterial: steelProduct safety notices:Ages 14 and upThis is a collectible, not a toy.

Set for a miniature steel model for the Klingon Bird of Prey from Star Trek. The kit contains steel sheets with the necessary components. No tools are required for assembly, but narrow pliers and tweezers make work much easier.Officially licensedContents: laser-cut metal sheets, building instructionsModel size: 10.5 x 7.6 x 4.3 cmMaterial: steelProduct safety notices:Ages 14 and upThis is a collectible, not a toy.

Set for a miniature steel model for the Klingon Vor'Cha class from Star Trek. The kit contains steel sheets with the necessary components. No tools are required for assembly, but narrow pliers and tweezers make work much easier.Officially licensedContents: laser-cut metal sheets, building instructionsModel size: 10.9 x 8.2 x 4.5 cmMaterial: steelProduct safety notices:Ages 14 and upThis is a collectible, not a toy.

Mars Exploration Rover NASA's twin rovers, named Spirit and Opportunity, launched separately in 2003 and landed three weeks apart in January 2004. They made important discoveries about wet environments on ancient Mars that may have been favorable for supporting microbial life. Although Spirit ceased communicating with Earth in March 2010, Opportunity continued its work on the Red Planet until 2018.Set for assembly of miniature steel models. No glue or soldering is required, but a pointed toning or tweezers facilitates assembly.Contents: laser-cut metal sheets, building instructionsModel size: 9.4 x 8.6 x 6 cmMaterial: steelProduct safety notices:Ages 14 and upThis is a collectible, not a toy.

This set contains laser-cut metal parts, from which a detailed model of the Millennium Falcon from Star Wars can be assembled. No tools are required for assembly, but narrow pliers and tweezers make work much easier.Officially licensedContents: laser-cut metal sheets, building instructionsModel size: 7.2 x 5.6 x 4.6 cmMaterial: steelProduct safety notices:Ages 14 and upThis is a collectible, not a toy.

Perseverance launched July 30, 2020, and landed in Jezero Crater, Mars on February 18, 2021. Perseverance features a plutonium power source and a variety of instruments to aid the rover in its mission to seek signs of previous life on Mars, as well as collect data to further aid future manned missions there.Ingenuity, the 4 pound helicopter that was launched with Perseverance, features four specially made carbon-fiber blades, arranged into two rotors that spin in opposite directions at around 2,400 rpm – many times faster than a helicopter on Earth. It is a separate experiment from the rover and demonstrates technologies needed for flying in the Martian atmosphere, setting several records for flights on planets other than Earth.Set for assembly of miniature steel models. No glue or soldering is required, but a pointed toning or tweezers facilitates assembly.Contents: laser-cut metal sheets, building instructionsModel size: Rover - 12.5 x 9 x 7.5 cm, Helicopter - 2.6 x 3.3 x 2 cmMaterial: steelProduct safety notices:Ages 14 and upThis is a collectible, not a toy.

Discovery was the third NASA orbiter to be built. It first launched August 30, 1984 and remained in service for more than 27 years. Among its many accomplishments was the work done on the International Space Station and carrying the Hubble Space Telescope into orbit. Set for assembly of miniature steel models. No tools are required for assembly, but narrow pliers and tweezers make work much easier.Contents: laser-cut metal sheets, building instructionsModel size: 11.4 x 7.1 x 5.8 cmMaterial: steelProduct safety notices:Ages 14 and upThis is a collectible, not a toy.

This set contains laser-cut metal parts, from which a detailed model of a Star Destroyer from Star Wars can be assembled. No tools are required for assembly, but narrow pliers and tweezers make work much easier.Officially licensedContents: 2 laser-cut metal sheets, building instructionsModel size: 10.4 x 6 x 5.9 cmMaterial: steelDifficulty: ModerateProduct safety notices:Ages 14 and upThis is a collectible, not a toy.

TARDIS (Time And Relative Dimension In Space) is a product of the advanced technology of the Time Lords. A properly maintained and piloted TARDIS can transport its occupants to any point in time and space. The interior of a TARDIS in general is much larger than its (disguise) exterior.This set contains laser-cut metal parts, from which a detailed premium model of the Doctor's TARDIS from Doctor Who can be assembled. No tools are required for assembly, but narrow pliers and tweezers make work much easier.Officially licensedContents: 2 laser-cut metal sheets, building instructionsModel size: 4.1 x 4.1 x 8.1 cmMaterial: steelDifficulty: ModerateProduct safety notices:Ages 14 and upThis is a collectible, not a toy.

This set contains laser-cut metal parts, from which a detailed model of Darth Vader's TIE Advanced X1 from Star Wars can be assembled. No tools are required for assembly, but narrow pliers and tweezers make work much easier.Officially licensedContents: laser-cut metal sheets, building instructionsModel size: 7.6 x 6.8 x 2.5 cmMaterial: steelProduct safety notices:Ages 14 and upThis is a collectible, not a toy.

This set contains laser-cut metal parts, from which a detailed model of an Imperial TIE fighter from Star Wars can be assembled. No tools are required for assembly, but narrow pliers and tweezers make work much easier.Officially licensedContents: laser-cut metal sheets, building instructionsModel size: 6.5 x 6 x 7.3 cmMaterial: steelProduct safety notices:Ages 14 and upThis is a collectible, not a toy.

Set for a miniature steel model for the USS Enterprise NCC-1701 from Star Trek: The Original Series. The kit contains steel sheets with the necessary components. No tools are required for assembly, but narrow pliers and tweezers make work much easier.Officially licensedContents: laser-cut metal sheets, building instructionsModel size: 12.7 x 6 x 6 cmMaterial: steelProduct safety notices:Ages 14 and upThis is a collectible, not a toy.

Snap Model KitGluing & Painting requiredScale: 1/600Parts: 117Length: 481 mmWith illustrated assembly instructionsProduct safety notices:Ages 10 and upCE

A USS Enterprise NCC-1701-D model you can build yourself for the holiday season? Make it so!With this countdown advent calendar, work towards the excitement of Christmas by building a premium quality star ship straight from your TV show, "Star Trek: The Next Generation". Every day beginning December 1st, open a door to expose a new component of your model to finish by Christmas Eve. No glue is needed - simply push the pieces together and enjoy.Official Star Trek product.High-quality model split into 24 pieces.Starting on December 1st, open a door every day to reveal a new part of your model.Pieces are push-fit - no glue required!Have your model complete by Christmas Eve, ready to be gifted or kept as a collectible.Product safety notices:CEContains small parts. Not suitable for children under 36 months old.Ages 6 and upUSK 1This is a collectible, not a toy.

Set for a miniature steel model for the USS Enterprise NCC-1701-D from Star Trek: The Next Generation. The kit contains steel sheets with the necessary components. No tools are required for assembly, but narrow pliers and tweezers make work much easier.Officially licensedContents: laser-cut metal sheets, building instructionsModel size: 8.8 x 6.5 x 4.2 cmMaterial: steelProduct safety notices:Ages 14 and upThis is a collectible, not a toy.

This set contains laser-cut metal parts, from which a detailed model of an X-Wing Star Fighter from Star Wars can be assembled. No tools are required for assembly, but narrow pliers and tweezers make work much easier.Officially licensedContents: laser-cut metal sheets, building instructionsModel size: 10.2 x 8.6 x 5.2 cmMaterial: steelProduct safety notices:Ages 14 and upThis is a collectible, not a toy.